Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Nestor Trevino-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] To remove the LCD from the motherboard, you must undoUndo the grey clip that holds the LCD ribbon in place.
[* black] First, pop
place by loosening one side of the clip with the plastic opening tool. Then poptool, then gently separate the other side by gently separatingof the clip from itsthe holder.
[* blackicon_note] The red end of the ribbon should slide out of the housing as you pull the LCD up and out and ofaway from the motherboard.
[* red] To remove the LCD from the motherboard, you must undoUndo the grey clip that holds the LCD ribbon in place.
[* black] First, pop
place by loosening one side of the clip with the plastic opening tool. Then poptool, then gently separate the other side by gently separatingof the clip from itsthe holder.
[* blackicon_note] The red end of the ribbon should slide out of the housing as you pull the LCD up and out and ofaway from the motherboard.