Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #7

Modifica in base a Miroslav Djuric-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] Attach the red lead first, followed by the white lead, and finish with the black lead.
[* black] Place the wire from the new battery onto the new solder bead.
[* black] Press the tip of the soldering iron onto the solder bead until it melts.
[* black] Slide the wire lead into the liquid solder until it is in the center of the bead, then remove the soldering iron.
[* black] Continue with the other two connections the same way, taking special care not to solder two of the connectors together.

Immagine 1

Nessuna immagine precedente.

Aggiunto