Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #5

Modifica in base a Miroslav Djuric-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* icon_note] We recommend that you clean the exposed surface of the board with a soft cloth or sponge and a small amount of rubbing alcohol.
[* black] Melt a small solder bead directly onto the metal connector on the board by placing the soldering iron onto the metal connector and then pressing solder against the tip and the board.
[* black] Once a small amount of solder has melted onto the board, lift the solder away first and then the soldering iron.

Immagine 1

Nessuna immagine precedente.

Aggiunto