Modifiche al passo #10
Modifica di cloclolulu —
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Fit the two oscillation arms into the 2 pins of the wide hair trimmer first, and by spreading them. | |
| [* black] Then tilt them to the inside, that the small latches keep it in place. | |
| - | [* black] Gently lift the other ends of the arms above the pin of the cast part. Careful: you may break the arms if you lift too hard! |
| + | [* black] Gently lift the other ends of the arms above the pin of the cast part. ***Careful:*** you may break the arms if you lift too hard! |