Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #4

Modifica in base a Walter Galan-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Continue to runInsert a small iPod opening tool into the seam on the hold button side of the Nano, with the edge of the tool pointing toward the rear panel.
[* icon_note] The large iPod
opening tool alongis no longer needed to gain access to the left side of the case until all fiveiPod.
[* black] Gently enlarge the existing gap by pressing/wiggling the small iPod opening tool into the gap near each of the the two
tabs attached to the rear case, pushing the clips toward the center of the Nano until both have been releasedfreed.
[* black] Continue to runInsert a small iPod opening tool into the seam on the hold button side of the Nano, with the edge of the tool pointing toward the rear panel.
[* icon_note] The large iPod
opening tool alongis no longer needed to gain access to the left side of the case until all fiveiPod.
[* black] Gently enlarge the existing gap by pressing/wiggling the small iPod opening tool into the gap near each of the the two
tabs attached to the rear case, pushing the clips toward the center of the Nano until both have been releasedfreed.