Modifiche al passo #8
Modifica di SASHINDRAN —
Modifica approvata da SASHINDRAN
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Use a pair of tweezers to lift the vibrator out of its crevace. | |
| [* icon_caution] Be gentle to avoid damaging the wires connecting it to the motherboard. | |
| - | [* black] Use a plastic opening tool or a spudger to gently pry the motherboard out of the case. Then, lift first from the top (near the camera). |
| + | [* black] Use a plastic opening tool or a spudger to gently pry the motherboard out of the case along the edges. |
| + | [* red] Then, gently lift the motherboard beginning from the top corner first (near the camera). |
| [* icon_note] The motherboard is secured with adhesive at the bottom (on the speaker assembly) so you may need to use an iOpener or heat gun to loosen the adhesive. Refer to the [guide|11677|iOpener guide|new_window=true] for further info. |