Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Steve Godun-

Modifica approvata da Steve Godun

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Disconnect the remaining three ZIF connectors.
+[* black] Peel back the Kapton tape from the remaining three ZIF connectors, then use your fingernail or a spudger to lift the hinged retainer clips on the ZIF connectors and slide the cables out from each.
[* icon_note] The third ZIF connector is mostly underneath the motherboard. When reassembling your device, make sure it is placed back underneath.