Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #10

Modifica in base a mwarrenus-

Modifica rifiutata da Andrew Optimus Goldheart

Prima di
Dopo il
Invariato

Righe Passo

[title] Motherboard back-side components
[* black] More ICs adorning the back side:
[* red] Lattice [http://www.latticesemi.com/~/media/LatticeSemi/Documents/DataSheets/iCE/iCE40LPHXFamilyDataSheet.pdf?document_id=49312|LP1K|new_window=true] Field Programmable Gate Array
[* orange] +14690B EWXS 9.504 AB Power Management IC
[* yellow] Linear Tech [http://www.linear.com/product/LT3009|LT3009|new_window=true] Linear Regulator (Pebble tells us that the LT3009 is included for supplying power to the upcoming Smartstraps)
[* green] Bosch Sensortec BMI160 (6-axis IMU with acceleroemeter and gyroscope)
[* light_blue] Freescale Xtrinsic [http://cache.freescale.com/files/sensors/doc/data_sheet/MAG3110.pdf?fpsp=1|MAG3110] 3D Digital Magnetometer
[* violet] Texas Instruments [http://www.ti.com/product/drv2603|DRV2603|new_window=true] Motor Driver
[* blue] The blue arrow points to the [http://developer.getpebble.com/smartstraps|smartstrap] data in/out pin; above it in red is the power in/out pin and below it is the smartstrap/charging ground pin. The red arrow points to the positive (+) battery connector and next to it in black is the negative (-) connector.