Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Joe Durand-

Modifica approvata da Joe Durand

Prima di
Dopo il
Invariato

Righe Passo

[* black] Push the motherboard towards the USB Charging Port, then lift the other side of the board up.
[* black] Slide the board out from under the white grooves near the USB Charging Port.
[* icon_note] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker.
+[* icon_caution] During reassembly, make sure the motherboard is fully installed and not sticking up past its original position, as this could damage the motherboard.