Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Joe Durand-

Modifica approvata da Joe Durand

Prima di
Dopo il

Righe Passo

-[* black] Slowly pull the motherboard from the device and flip it upside down.
-[* icon_caution] Ensure that the motherboard isn’t caught onto the box shaped component when pulling it up, as this could cause the motherboard to break.
+[* black] Push the motherboard towards the USB Charging Port, then lift the other side of the board up.
+[* black] Slide the board out from under the white grooves near the USB Charging Port.
+[* icon_note] If the motherboard won't budge, be sure that the square component on the bottom of the motherboard clears the edge of the speaker.