Modifiche al passo #2
Modifica di Scott Kaufman —
Modifica approvata da Scott Kaufman
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Shift to 3rd gear (the largest cog and farthest from the body of the bike) | |
| [* red] Adjust the derailleur until it lines up vertically with the 3rd gear | |
| + | [* icon_note] The same rules apply for this one as when setting the lower bound. However, you want the smallest gap possible between the outer edge of the chain and the guard. The smaller gap will allow your bike to downshift much easier. |
| + | [* icon_note] The derailleur should be aligned now, but if you are unable to move the derailleur far enough away from the frame, you may need to tighten the cable itself. If so, proceed to Step 3. |