Modifiche al passo #4
Modifica di William DiVittorio —
Modifica approvata da William DiVittorio
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* black] Set the chain, with the loose end on top, on the chain ring. | |
| [* red] Make sure the chain goes thru the guide at the top of the chain ring. | |
| + | [* black] Connect the ends of the masterlink and pull, it should snap into place. If not, place the master link above the rear gear, hold the rear tire in place, and give the pedal a push. The stress on the chain should snap the master link into place. |