Aggiusta le tue cose Community Store

Modifiche al passo #5

Modifica di Scott Kaufman —

Modifica approvata da Scott Kaufman

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Loosen the spokes on the side of the tire slightly using the spoke wrench. Adjust the spoke directly where the bend was along with 2 or 3 spokes on each side of it. Try to keep each adjustment around 1/4 to 1/2 of a turn to avoid tightening or loosening a spoke too much.
+[* black] Loosen the spokes on the side of the tire slightly using the spoke wrench. Adjust the spoke directly where the bend was along with 2 or 3 spokes on each side of it. Try to keep each adjustment around 1/4 to 1/2 of a turn to avoid tightening or loosening a spoke too much.
[* icon_note] The nut you are tightening is screwing onto the spoke, so if you turn it counter-clockwise as you are looking down on it, you are tightening the spoke.
-[* red] Go back and tighten the spokes that connect to the opposite side of the tire using the same technique.
+[* black] Go back and tighten the spokes that connect to the opposite side of the tire using the same technique.
[* icon_note] As you complete this step, you should see the rim moving in the direction that you are tightening the spokes; however, you may have to repeat this step many times before the rim is perfectly straight.