Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Zoe Cagle-

Modifica approvata da Zoe Cagle

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Using the tweezers, remove the eight ribbon connectors along the sides of the motherboard.
+[* red] Using tweezers, gently pull the five marked ribbons out of the ZIF connectors along the sides of the motherboard.
+ [* icon_caution] Note that these ZIF connectors are held in place by friction and do ***not*** have locks -- lifting the flaps on these connectors will break them!
[* orange] Three of the ribbon connectors have plastic clamping flaps that cover the ribbon to prevent slippage. Use the tweezers to flip them up before ribbon removal.
- [* icon_caution] Do ***not*** flip up the other flaps; they are not locks and will break.
[* icon_reminder] When reassembling the device, be sure to flip the ZIF clamps back down.
[* icon_note] While the SD card reader is shown as removed in this photo, it is optional for the removal of the motherboard.