Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Brett Balcer-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Flip the board over and locate the ribbon cable for the main display on the bottom of the board
-[* icon_note] Slowly lift the ribbon connecter from its housing using a plastic opening tool or your fingers
+[* blue] Locate the ribbon cable for the main display on the bottom of the board
+[* black] Slowly lift the ribbon connecter from its housing using a plastic opening tool

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato