Modifiche al passo #1
Righe Passo
[* yellow] Identify the Hard Drive in the case. |
[* icon_note] If there is more than one hard drive installed the process is the same for each hard drive. |
[* red] Remove the power cable from the hard drive by squeezing the side tabs in and pulling gently. |
[* green] Remove the IDE cable from the hard drive by gently pulling the ribbon cable out. |
Immagine 2
Nessuna immagine precedente.
Aggiunto
Immagine 3
Nessuna immagine precedente.
Aggiunto