Salta al contenuto principale

Modifiche al passo #6

Modifica in base a bushing-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Place the LCD on top of the touch screen, with the two ribbon cables pointing towards the battery board (as shown in the picture).
[* icon_caution] Make sure that the edge of the LCD is flush with the black plastic frame, or you will not be able to reassemble the unit.
[* blue] Make sure that both the white and pink cables are tucked into the "groove" formed by small plastic pegs; they must not overlap the screw threads or the buttons, or you may damage them while reassembling the device.

Immagine 1

Nessuna immagine precedente.

Aggiunto