Salta al contenuto principale

Modifiche al passo #5

Modifica in base a bushing-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] It is important that the touch screen and LCD sit perfectly flat in the frame, or else you will not be able to close up the device. Putting the touch screen in the frame first helps accomplish this goal.
[* red] Lay the working touch screen down into the frame from the back side, with the ribbon cable oriented as shown.

Immagine 1

Nessuna immagine precedente.

Aggiunto