Salta al contenuto principale

Modifiche al passo #4

Modifica in base a bushing-

In attesa di approvazione


Righe Passo

[* black] The bottom LCD assembly is actually two pieces which are glued together; if you replace one, you need to keep the working part and use it with the new part.
[* red] Carefully separate the two pieces by inserting a spudger into the groove between the metal piece and the darker piece, then pry them apart.
[* black] Set aside the broken piece; you should now have one working touch screen and one working bottom LCD, as two separate pieces.

Immagine 2

Nessuna immagine precedente.