Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #1

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* violet] Use theLocate the black ZIF connector located directly below the lens.
[* black] Use the
Spudger to rotate the black ZIF connector tab up and pull the ribbon out that it was holding.
[* orange] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.
[* violet] Use theLocate the black ZIF connector located directly below the lens.
[* black] Use the
Spudger to rotate the black ZIF connector tab up and pull the ribbon out that it was holding.
[* orange] Use the Spudger and pull each end of the brown ZIF connector tab directly out in the direction that the ribbon is going. You must unlatch both ends before the connector can pull out. Once both ends are unlatched, pull ribbon cable out.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto