Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #1

Modifica in base a Jarrod Belsick-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_caution] Before working on the flash assembly make sure the flash is completely discharged or pay attention to where your fingers are. The capacitor in the flash assempbly can hold a charge for a long time and it can shock you.
[*
black] Flash Assembly should be loose from taking out the LCD,LCD and all ribbon connectors have already been disconnected.
[* black] Rotate flash assembly ifWhile holding the camera with the lens facing you, carefully lift the flash assembly is not looseso the little nub at the top comes out of its groove.
[* icon_caution] Before working on the flash assembly make sure the flash is completely discharged or pay attention to where your fingers are. The capacitor in the flash assempbly can hold a charge for a long time and it can shock you.
[*
black] Flash Assembly should be loose from taking out the LCD,LCD and all ribbon connectors have already been disconnected.
[* black] Rotate flash assembly ifWhile holding the camera with the lens facing you, carefully lift the flash assembly is not looseso the little nub at the top comes out of its groove.