Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #12

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Lay the camera on its front side. Then use your fingers to gently shift the body of the camera while holding onto
[* black] Use finger to press down on camera's metal casing. Using other hand, lift
the LCD screen so thatstraight up, making sure the LCD screen's ribbon for the LCD display can slide through the slot in thecable slides free of metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the Motherboard. Domotherboard. Do not break it in attempts to getapply a force on the LCD screen outmotherboard.
[* black] Lay the camera on its front side. Then use your fingers to gently shift the body of the camera while holding onto
[* black] Use finger to press down on camera's metal casing. Using other hand, lift
the LCD screen so thatstraight up, making sure the LCD screen's ribbon for the LCD display can slide through the slot in thecable slides free of metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the Motherboard. Domotherboard. Do not break it in attempts to getapply a force on the LCD screen outmotherboard.
[* black] Camera, metal case, and tripod internal thread end can be separated now.