Salta al contenuto principale

Modifiche al passo #12

Modifica in base a Jarrod Belsick-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Rotate the camera so it is laying on its front side. Then use your fingers to bendgently shift the motherboard assemblybody of the camera while holding onto the LCD screen so that the ribbon for the LCD display can pull freeslide through the slot in the metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the motherboard. Do not break it in attempts to get the LCD screen out.
[* black] Rotate the camera so it is laying on its front side. Then use your fingers to bendgently shift the motherboard assemblybody of the camera while holding onto the LCD screen so that the ribbon for the LCD display can pull freeslide through the slot in the metal casing. Once ribbon is loose, lift LCD display out from the rest of the camera.
[* icon_caution] Be very careful with the motherboard. Do not break it in attempts to get the LCD screen out.
[* black] Camera, metal case, and tripod mount female end can be separated now.