Salta al contenuto principale

Modifiche al passo #11

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] OnLocate the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector. Both are located atconnectors on the bottom, belowfront of the lenscamera.
[* red] OnLocate the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector. Both are located atconnectors on the bottom, belowfront of the lenscamera.
[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull the ribbon cable straight out.
[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull the ribbon cable straight out.