Salta al contenuto principale

Modifiche al passo #11

Modifica in base a Jarrod Belsick-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] On the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector, bothconnector. Both are located at the bottombottom, below the lens.
[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull out the ribbon cable straight out.
[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull out the ribbon cable straight out.
[* red] On the front side of the camera, there are two more ribbon cables that need to be released, one black ZIF connector and one blue ZIF connector, bothconnector. Both are located at the bottombottom, below the lens.
[* black] Use the flat end of the spudger to flip up the tab on the blue ZIF connector. Then pull out the ribbon cable straight out.
[* black] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Then pull out the ribbon cable straight out.