Salta al contenuto principale

Modifiche al passo #11

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] On the front side of the camera, there are two more connectorsribbon cables that need to be removedreleased, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the blue ZIF connector. Then pull out the ribbon connector from the cameracable straight out.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the black ZIF connector. Then pull out the ribbon connector from the cameracable straight out.
[* red] On the front side of the camera, there are two more connectorsribbon cables that need to be removedreleased, one black ZIF connector and one blue ZIF connector, both located at the bottom below the lens.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the blue ZIF connector. Then pull out the ribbon connector from the cameracable straight out.
[* black] Use the Spudgerflat end of the spudger to rotateflip up the tab on the black ZIF connector. Then pull out the ribbon connector from the cameracable straight out.