Salta al contenuto principale

Modifiche al passo #9

Modifica in base a Emma Civalier-

Modifica approvata da Emma Civalier

Prima di
Dopo il
Invariato

Righe Passo

[* redblack] Rotate the camera upside down to locate the small black ZIF connector located in the middle of the camera.
[* blackred] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Pull the ribbon cable straight out.
[* redblack] Rotate the camera upside down to locate the small black ZIF connector located in the middle of the camera.
[* blackred] Use the flat end of the spudger to flip up the tab on the black ZIF connector. Pull the ribbon cable straight out.
[* black] Remove the orange ribbon cable from the rest of the camera.