Salta al contenuto principale

Modifiche al passo #9

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] Rotate camera upside down to locate the small black ZIF connector located in the middle of the camera.
[* black] RotateUse the flat end of the spudger to flip up the tab on the black ZIF connector tab directly up and pullconnector. Pull the ribbon cable out of the connectorstraight out.
[* black] RotateUse the flat end of the spudger to flip up the tab on the black ZIF connector tab directly up and pullconnector. Pull the ribbon cable out of the connectorstraight out.
[* black] Orange ribbon cable should be able to be removed from the rest of the camera.