Salta al contenuto principale

Modifiche al passo #7

Modifica in base a Jarrod Belsick-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Using the flat end of the spudger, begin to slightly peel back the orange ribbon cable from the rest of the camera by lifting up at the bottom corner. Two tabs should come loose.
[* black] Rotate the speaker so that it unlatches from the camera frame. Then use the flat end of the spudger to lift up the speaker from the rest of the camera.
[* black] Rotate the speaker so that it unlatches from the camera frame. Then use the flat end of the spudger to lift up the speaker from the rest of the camera.