Salta al contenuto principale

Modifiche al passo #5

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Remove 4 screws from back of camera,blue] Using a Phillips #00 Screwdriver remove the four screws located underneath where the LCD wasdisplay used to be. Screws have a length of .1" and a diameter of .054".
[* black] Removeorange] Using a Phillips #00 Screwdriver remove one screw from the bottom of the camera. Screw has a length of .088" and a diameter of .066".
[* black] Removered] Using a Phillips #00 Screwdriver remove one screw from the side of the camera. Screw has a length of .1" and a diameter of .66"
[* black] Remove 4 screws from back of camera,blue] Using a Phillips #00 Screwdriver remove the four screws located underneath where the LCD wasdisplay used to be. Screws have a length of .1" and a diameter of .054".
[* black] Removeorange] Using a Phillips #00 Screwdriver remove one screw from the bottom of the camera. Screw has a length of .088" and a diameter of .066".
[* black] Removered] Using a Phillips #00 Screwdriver remove one screw from the side of the camera. Screw has a length of .1" and a diameter of .66"

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione