Salta al contenuto principale

Modifiche al passo #4

Modifica in base a James Loy-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] Locate the small blue ZIF connector on the back side of the motherboard and next to the LCD screen.
[* black] Use Spudgerspudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
[* black] Use Spudgerspudger to lift up the top of the blue ZIF connector piece. Slide out the ribbon (the blue ZIF connector remains attached to the motherboard).
[* black] Once the ribbon is removed the LCD screen can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull LCD screen out or rotate past 180 degrees away from its initial position, or else you will damage the remaining ribbon that holds the LCD sceen in place.