Aggiusta le tue cose Community Store

Modifiche al passo #4

Modifica di Jarrod Belsick —

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* red] Locate the small blue connector on the back side of the Motherboard and next to the LCD display.
-[* black] Use Spudger to remove ribbon from blue connector. Blue connector does not come out, only the ribbon.
-[* black] Once the ribbon remove the LCD can rotate to reveal more screws underneath.
-[* icon_caution] Do pull LCD display out or rotate past 90 degrees, or else you will damage the remaining ribbon that holds the LCD in place.
+[* black] Use Spudger to lift up the top of the blue connector piece. Slide out the ribbon (the blue connection piece is attached to the motherboard).
+[* black] Once the ribbon is removed the LCD can be rotated away from its initial position to reveal more screws underneath.
+[* icon_caution] Do not pull LCD display out or rotate past 90 degrees away from its initial postion, or else you will damage the remaining ribbon that holds the LCD in place.