Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Jarrod Belsick-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* redblue] Locate the small blue connector on the back side of the Motherboard and next to the LCD display.
[* black] Use Spudger to lift up the top of the blue connector piece. Slide out the ribbon (the blue connection piece is attached to the motherboardMotherboard).
[* redblue] Locate the small blue connector on the back side of the Motherboard and next to the LCD display.
[* black] Use Spudger to lift up the top of the blue connector piece. Slide out the ribbon (the blue connection piece is attached to the motherboardMotherboard).
[* black] Once the ribbon is removed the LCD can be rotated away from its initial position to reveal more screws underneath.
[* icon_caution] Do not pull LCD display out or rotate past 90 degrees away from its initial postion, or else you will damage the remaining ribbon that holds the LCD in place.

Immagine 1

Vecchia Versione

Nuova Versione