Aggiusta le tue cose Community Store

Modifiche al passo #6

Modifica di Jonathan Fish —

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening it it causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket.
-[* black] Shift through each gear while pedaling. The derailleur should move one gear every time you shift up or down on the shifter.
-[* black] If the chain skips or makes noise when not shifting, use the barrel adjustment screw to position the guide sprocket so it is right under the sprocket that corresponds to the number the shifter displays.
+[* black] Fine tune the derailleur by tightening or loosening the barrel adjuster screw. Loosening this screw causes the derailleur to move slightly towards a larger sprocket, while tightening it moves the derailler towards a smaller sprocket.
+[* black] Shift through each gear while pedaling. The derailleur should move the chain one gear over each time you shift up or down.
+[* black] If the chain skips or makes noise when you are not shifting, use the barrel adjustment screw to fine tune the derailleur alignment.
[* black] Repeat the previous steps until the derailleur shifts smoothly and makes a minimal amount of noise.