Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Brandon-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* violet] Remove the ribbon connecting the lens assembly to the circuit board. You may need to use the spudger if your fingers can not pull it.
[* black] Next, remove the 3 screws holding the lens assembly in place.
[* red] The two screws on the left are 4.5mm with washers.
[* blue] The single screw on the right is 4mm and blue.