Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Nicole Rivera-

Modifica approvata da Nicole Rivera

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Place the car jack on the jacking point, located on the passenger side behind the front wheel.
+[* red] Place the floor jack on the jacking point, located on the passenger side behind the front wheel.
+[* blue] depending on the floor jack, either twist or move the leaver up and down to raise the car
[* black] Raise the car high enough to place the jack stand under the car. Make sure the stand will have solid contact with the car frame.
- [* black] The emergency jack has an opening on the top of it. The jacking point has a lip and is at the edge of the car (boxed in the photo). The lip of the jacking point should fit into the opening on the jack.
- [* icon_caution] Emergency jacks like the one shown in the photo are not safe to use for routine maintenance. Use a floor jack with the proper weight rating and an adapter that is appropriate for your vehicle.
-[* black] Slowly lower the car onto the jack stand.
- [* icon_caution] Never work under a car jack only. Car jacks may slip or fail.
+ [* black] The jacking point has a lip and is at the edge of the car (boxed in the photo). The lip of the jacking point should fit into the opening on the jack.
+[* black] Slowly lower the car onto the jack stand by using the floor jack.
+ [* black] When the car is secured on the jack stands, remove the floor jack.
+[* icon_caution] Do not use the floor jack to keep the car propped up

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione