Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Toni Pipes-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* yellowblack] The fan is permanently attached to the silver heat sink next to the RAM.
[* yellow]
To completely remove the parts, you also need to loosen the heat sink’s four screws with a Phillips #00 screw driver.
[* icon_note]
Take out the screws in the numerical order shown on the heat sink.
[* yellowblack] The fan is permanently attached to the silver heat sink next to the RAM.
[* yellow]
To completely remove the parts, you also need to loosen the heat sink’s four screws with a Phillips #00 screw driver.
[* icon_note]
Take out the screws in the numerical order shown on the heat sink.