Modifiche al passo #3
Modifica in base a Toni Pipes-
- Prima di
- Dopo il
- Invariato
Righe Passo
[* black] The fan is permanently attached to the silver heat sink next to the RAM. To completely remove the parts, you also need to loosen the heat sink’s four screws with a Phillips #00 screw driver. Take out the screws in the numerical order shown on the heat sink. |
[* black] The fan is permanently attached to the silver heat sink next to the RAM. To completely remove the parts, you also need to loosen the heat sink’s four screws with a Phillips #00 screw driver. Take out the screws in the numerical order shown on the heat sink. |