Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Luke Reilly-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the three 3.2mm screws on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] There is a 5.6mm screw in the lower case holding the drive in. Unscrew is to allow the drive to be removed.
[* black] Pull the drive firmly from the laptop, taking care not to bend the sliding rails on the side of the drive.
[* black
icon_note] At this point you can remove the entire drive to have it replaced, or continue on with this guide to disassemble the optical drive itself
[* black] There is a 5.6mm screw in the lower case holding the drive in. Unscrew is to allow the drive to be removed.
[* black] Pull the drive firmly from the laptop, taking care not to bend the sliding rails on the side of the drive.
[* black
icon_note] At this point you can remove the entire drive to have it replaced, or continue on with this guide to disassemble the optical drive itself

Immagine 1

Vecchia Versione

Nuova Versione