Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Luke Reilly-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the three 3.2mm screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] There is a 5.6mm screw in the lower case holdingicon_note] At this point you can remove the entire drive in. Unscrew is to allowhave it replaced, or continue on with this guide to disassemble the optical drive to be removed.itself
[* black] Remove the three 3.2mm screws (3.2mm) on the top of the drive and take off the top plate. Be careful, the casing is very flimsy.
[* black] There is a 5.6mm screw in the lower case holdingicon_note] At this point you can remove the entire drive in. Unscrew is to allowhave it replaced, or continue on with this guide to disassemble the optical drive to be removed.itself

Immagine 1

Vecchia Versione

Nuova Versione