Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Walter Galan-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_reminder] Before proceeding, ensure that the battery has been removed to prevent any damage to components.
[* black] Insert an unrolled paper clip into the small hole on the side of the optical drive.
[* icon_note] The tray will partially pop out of the laptop.
[* icon_note] The tray will partially pop out of the laptop.
[* red] Remove the single 5.6 mm Phillips screw securing the optical drive to the lower case.
[* black] Firmly pull the drive straight away from the laptop.
[* icon_caution] While pulling the drive out, be careful not to bend the sliding rails on both sides of the optical drive.
[* black] At this point you can remove the entire drive to have it replaced, or continue on with this guide to disassemble the optical drive itself.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente.

Aggiunto