Modifiche al passo #4
Modifica di Thomas Paulsen —
Modifica approvata da Thomas Paulsen
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] Carefully inspect the pedal to make sure that is has not been damaged or deformed in any manner that will detract from its ability to carry out its specified duty. |
|---|---|
| - | [* icon_reminder] During this inspection make sure to check within the "screw/bolt tunnels" with a flashlight for any gunk or damage as well. |
| + | [* black] Line up the pedal with its socket and begin to turn it in the correct tightening direction that was specified at the beginning of the guide. |
| + | [* black] Once the pedal is partially secured from the initial rotations, use your wrench to continue tightening. |
| + | [* black] Once resistance is felt, you will want to turn the pedal about 1/8 of a rotation more for proper tightness. |
| + | [* icon_caution] Do not crank on the wrench to tighten the pedal further. This can lead to a stuck pedal in the future. |