Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Jase Sasaki-

Modifica approvata da Jase Sasaki

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Remove the seven Phillips #1 screws that are holding the fan and heat sink down.
+[* black] Unscrew the six Phillips J1 screws that are holding the fan and heat sink down. Then use Philips #1 to remove the screw near the bottom of the heat sink.
[* red] Six Silver Chrome 5.8mm
[* orange] One 5.8mm
[* icon_caution] Remove the four screws that are holding down the CPU (the four to the top left that form a rectangle in this image) first. Unscrew them in an X pattern (eg. top left screw, bottom right screw, top left screw, bottom right screw) to minimize risk of harming CPU.