Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Jase Sasaki-

Modifica approvata da Jase Sasaki

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Unscrew the four screws holding down the back panel with a Phillips JIS #1 screwdriver. Then remove the M screw in the middle of the back panel with a Phillips #1 screwdriver.
- [* red] Four 3.9mm Phillips JIS #1 screws
+[* black] Unscrew the four Phillips #1 screws holding down the back panel. Then remove one 5.8mm Phillips #1 screw labeled "M" in the middle of the back panel.
+ [* red] Four 3.9mm Phillips #1 screws
[* orange] One 5.8mm Phillips #1 screw