Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Jase Sasaki-

Modifica approvata da Jase Sasaki

Prima di
Dopo il
Invariato

Righe Passo

-[* red] Remove the four screws holding down the back panel with a Magnetized Jewelers Phillips #1 screwdriver.
-[* orange] Remove the M screw in the middle of the back panel with a Phillips #1 screwdriver.
-[* icon_note] Only the M screw in the middle can be removed, the other four are held in place by the panel.
+[* black] Remove the four screws holding down the back panel with a Phillips J1 screwdriver. Then remove the M screw in the middle of the back panel with a Phillips #1 screwdriver.
+ [* red] Four 3.9mm
+ [* orange] One 5.8mm

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Eliminato

Immagine 3

Eliminato