Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #2

Modifica in base a Scott Head-

In attesa di approvazione

Prima di
Dopo il
Invariato

Righe Passo

[* black] Use the edge of an iPod opening tool to pry the connector out of its socket on the logic board.
[* black] Remove the front panel assembly from the Touch.
[* icon_note] If you are installing a new display assembly, you will want to replace the old adhesive with new adhesive.
[* black] Remove as much of the old adhesive as you can and then apply new adhesive strips to the appropriate places.
[* black] You will also need to transfer the metal plate that sits over the front camera and sensor windows. You can do this using a heat gun or hair dryer.
[* icon_note] After you have reassembled your device, it is common to get a white screen when powering it up for the first time. All you have to do is a hard reset and that should fix it.