Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #45

Modifica in base a Sam Goldheart-

Modifica approvata da Sam Goldheart


Righe Passo

[* black] Carefully insert the flat end of a spudger between the rear-facing camera and the top of the logic board.
[* black] Pry the logic board up enough to grab it with your fingers.
[* icon_caution] Be extremely careful not to damage the rear-facing camera cable, or any logic board components.
[* icon_note] If the logic board does no lift easily, there may still be adhesive holding it to the rear case. Try sliding the pick farther before prying again.

Immagine 1

Nessuna immagine precedente.


Immagine 2

Nessuna immagine precedente.