Salta al contenuto principale

Modifiche al passo #20

Modifica in base a Sam Goldheart-

Modifica approvata da Sam Goldheart

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] We're getting [guide|30592|pretty good|stepid=71616|new_window=true] at [guide|18604|prying up glass|stepid=53111|new_window=true], so we've got some idea of where to start.
[* black] Step 1: Load up on heat. Use plenty of [product|IF145-198|iOpeners|new_window=true]. (Or one iOpener plenty of times).
[* black] Step 2: Pry gently in many places. [product|IF145-123|Opening Picks|new_window=true] are the ideal tool.
[* black] Step 3: ???
[* black] Step 4: The edges you just heated are nowhere near the adhesive you wanted to loosen. The adhesive is actually entirely underneathunder the LCD panel and not at all around the edges you just heated.
[* black] Step 4b:
[http://instagram.com/p/y7xALBO_A3/|Apply plenty of heat to the back|new_window=true] and pry slowly.
[* black] Step 4: The edges you just heated are nowhere near the adhesive you wanted to loosen. The adhesive is actually entirely underneathunder the LCD panel and not at all around the edges you just heated.
[* black] Step 4b:
[http://instagram.com/p/y7xALBO_A3/|Apply plenty of heat to the back|new_window=true] and pry slowly.