Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Geoff Wacker-

Modifica approvata da Geoff Wacker

Prima di
Dopo il
Invariato

Righe Passo

-[* black] Insert the plastic opening tool between the midframe and the LCD screen.
-[* black] Run the spudger all the way around the LCD screen to break the rubber sealant.
-[* icon_note] Be careful not to separate the touch sensor from the glass screen when cutting the sealant.
+[* black] Insert a plastic opening tool between the midframe and the display assembly.
+[* black] Work the plastic opening tool around the perimeter of the phone to break the adhesive.
+ [* icon_note] This adhesive is relatively weak, so no heat gun should be necessary.
+[* icon_caution] Be careful to not separate the front glass panel from the rest of the display assembly, as it is still held together with adhesive.