Modifiche al passo #2
Modifica di Philip Le Riche —
Modifica approvata da Philip Le Riche
- Prima di
- Dopo il
- Invariato
Righe Passo
| + | [title] Removal and refitting of the image sensor |
|---|---|
| [* black] The image sensor can be inspected or replaced without further disassembly of the lens. However, any dust or fingermarks may have a major impact on image quality and so it should preferably be left alone. | |
| [* black] With a small craft knife, scrape away the locking glue from the 3 screws securing the image sensor plate to the back of the lens. Take care to remove any loose fragments of glue which might fall into the lens. | |
| [* black] Remove the 3 screws. Remaining glue will make these stiff - take care not to burr the heads. Gently ease the image sensor away, keeping the lens face-down on the bench. | |
| [* black] Put the sensor aside, safe from dust contamination, such as in a self-sealing polythene bag. |